1 / 7
Space Rail Adult Marble Track Repair Kit — zdjęcie 1
1 / 7

Space Rail Adult Marble Track Repair Kit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement parts for the Space Rail marble run

Ocena
0 / 5
Polubienia
3
Pobrania
39
Wydruki
0
Wyświetlenia
192
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I added the part with two holes to the clamp, that the original part of the SpaceRail marble track system has to attach an underneath rail or a lift/screw tower attachment point.

As the injection molded original did slide easier than the fdm replacement it made different hole diameters necessary for different applications. This is why there are two versions of the new clamps in this set: a chamferred one with 3.8mm holes for inserting rails and a 3.7mm version without chamferr to attach to the connection pegs on the lift/screw towers. They are marked with an embossed “R” for the rail attaching version and “T” for the tower attaching version for easier identification.

To get the attachment piece close to the original it meant to extrude the holed part, which made supports a necessity, causing a less clean underside, but that should not interfere with the intended use at all and the supports detach quite easily.

Tagi