Grinding Wheel Insert for Norton 1" bore to 1/2" arbor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bushing fits inside a Norton grinding wheel with a 1" bore so it will fit on a bench grinder with a 1/2" arbor.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I bought a white Norton grinding wheel for sharpening tools and it came with a 1" bore and a series of concentric bushings. The problem is there is too much play in that stack of bushings and it is difficult to get the wheel centered when it is installed. I designed a bushing to fit inside the grinding wheel's bore so that it will fit the ½" arbor on my bench grinder.
I printed mine in PLA with 5 top and 5 bottom layers, 4 perimeters and 60% gyroid infill.
Note: I wrote “flat only” on this wheel because I have one wheel for flat tools like chisels and planes, and one for curved tools like gouges and augers.