Handle and feet for Heathkit Sine and Square Wave Generator Model IG-82
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach handle using two 10-24 x 2" machine screws, washers, and nuts. Print four of the feet and attach using M4 x…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Attach handle using two 10-24 x 2" machine screws, washers, and nuts. Print four of the feet and attach using M4 x 12mm bolts with washers and nuts. First printed on Prusa i3 MK3S using white PLA to make sure the size was correct. Then printed with black resin on Elegoo Saturn 4 Ultra. The resin print is much stronger than the PLA. These also fit the Heathkit Model AG-10.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO SATURN 4 Ultra
Yes
Supports:
Yes
.05
Filament: Elegoo Tough Resin Overture White PLA Black
Category: Machine Tools