Handle and feet for Heathkit Sine and Square Wave Generator Model IG-82
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach handle using two 10-24 x 2" machine screws, washers, and nuts. Print four of the feet and attach using M4 x…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Attach handle using two 10-24 x 2" machine screws, washers, and nuts. Print four of the feet and attach using M4 x 12mm bolts with washers and nuts. First printed on Prusa i3 MK3S using white PLA to make sure the size was correct. Then printed with black resin on Elegoo Saturn 4 Ultra. The resin print is much stronger than the PLA. These also fit the Heathkit Model AG-10.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO SATURN 4 Ultra
Yes
Supports:
Yes
.05
Filament: Elegoo Tough Resin Overture White PLA Black
Category: Machine Tools