Castle Turret Pen Holder | Fridge Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Castle Turret to protect your pens as they stand watch on your fridge.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
Castle Turret Pen Holder
A castle turret to protect your pens as they stand watch on your fridge.
This magnetic pen holder is designed to look like a medieval castle tower while keeping your favorite pens, markers, or pencils easy to grab in the kitchen, office, or workshop.
Features
Uses 3x standard 8mm x 3mm neodymium magnets per turret
Strong magnetic hold for fridges and metal cabinets
Prints cleanly with minimal material
Medieval castle aesthetic with detailed brick texture
Fits common pens and markers including:
Sharpie
Pilot G2
mechanical pencils
dry erase markers
Magnet Options:
Rear Slot Method (Recommended)
Easy installation after printing
No print pause required
Best for reliability and simple printing
Print model vertically as shown in the photos
Hidden Magnet Method
Pause the print and insert magnets mid-print
Creates a cleaner hidden-magnet appearance
Requires paint-on supports for upper turret sections
Print with the flat back surface on the print bed (last photo)
Printing Instructions:
Material: PLA or PETG
Infill: 10-20%
Supports: Not required for slotted version. Required for hidden magnets.
Layer Height: 0.2mm
Perimeters: 2 minimum
Assembly:
Requires 3 magnets per holder.
Insert the magnets into the rear slots after printing. Needle-nose pliers work well for pressing them into place.
If your printer tolerances are slightly loose, a small drop of super glue can be used to secure the magnets.
If you print one, post a make — I’d love to see different castle color combinations and setups!