Meerkorn Mylly Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement part for the Meerkorn Mylly soap grinder
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement for the plate that pushes the soap down in a Meerkorn Mylly soap grinder. You will need a threaded M5 insert (the M5x5.8 mm from CNC Kitchen works great) and a soldering iron to melt it in.
I suggest melting the insert in from the flat side, as it will be pulled into the direction of the melt. It'll be stronger that way.
My original unfortunately stripped itself, making it so it was no longer able to push soap down. I'm sure the good people at Meerkorn would send out replacement parts, but I don't want to bug them about it and I feel this is sturdier for the future 😅
Unfortunately, you will lose the ability to remove the plate by pulling it from the side like the original, but I couldn't find a good way to make a strong design like that. And it's not too much effort to spin it back off.