Rutlands leafblower attachment for disc hovercraft
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach your Rutlands leafblower to the base of a hovercraft. Or perhaps use it as a hanger on a wall. It's your choice
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 40
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
I wanted to build a little hovercraft for fun and needed some way to clamp two of them to a bit of ply. This design provides such a design. I've added a slot for TPU to provide a tight fit.
You can print this with no supports, but I recommend painting on some supports under the pegs only. Don't print supports for the TPU slots.
I printed this in TPU. I recommend a 40mm cutter to create the holes for under the hovercraft. You can align this properly by using the cutter as a guide (push it up through the hole as a locator).
I've added my .3mf for the painted on supports.