Single Shot Tray for Umarex Fusion 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A single shot tray for the umarex fusion 2 as a replacement for the rotary magazine
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I got a few of these rifles as factory returns so none of them came with mags, so I wanted an easier way to test them.
The tray is a tight fit in the well so make sure to be careful when pushing it in or out. It has a groove in the middle like the original mag so it will “clip” into place. Id recommend doing a light filing of the edges of the bottom layer especially around the pellet groove as to make sure the probe doesn't catch.
Also be wary when removing the tray, as I had to tap it out with a hammer and screwdriver and the probe was sticking out ever so slightly and bent it. So definitely make sure its held all the way back.
added ambi one cuz the high wall was annoying