LTT Screwdriver Inspired Pi Zero Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Have you ever looked at the LTT screwdriver and jokingly thought "Yeah, but can it run DOOM?" This one can.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for the Pi Zero (Original/W/2) without pre-soldered GPIO or heatsinks (some heatsinks might work but your mileage may vary.)
Proportions are as close as possible to the real deal Screwdriver- obviously some design compromises were needed to put a computer inside this shape. And I still haven't actually gotten around to buying an LTT screwdriver to use as reference, so...
Super easy prints and build. Needs a little glue for the shaft components, and four M2.5x5-6L screws like these:
https://amzn.to/3G5JJYd
I used three filaments for this build-
Polymaker Metallic Grey-
now Panchroma Metallic Silver:
https://amzn.to/4cqxykG
Polymaker PolyLite PLA Pro, both Black & Orange:
Black: https://amzn.to/3G6Mp7W
Orange: https://amzn.to/42svNiu
As always, I include .3MF, .STEP, and a Fusion file.
Hope you like it!