1 / 3
Iowa State Cyclones - Hanging Yard Sign
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created this since the wood one, Pictured below started to weather so I redesigned it out of PLA.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this to replace the wooden sign (pictured) because of it fading and swelling.
- Printed in PLA can use any type of filament, PETG may be a better choice for longer life and strength.
- Standard Print settings, your choice to have a higher infill for more strength.
- No Supports Required.
- To accomplish the multi color on a single extruder machine I placed two pauses at layers 22 & 25 ( 4.40 & 5.00) Yellow at Start, At First Pause Red, and after that Yellow again.
- You may have to tweak this based on what printer you have; I printed on a Flash Forge A5M using Orca Slicer.
- I used heavy metal gauge wire to connect them together and then hung it from a Garden Flag Holder.
Hope you like this, Please let me know if you have any questions.