Voron Design RMRRF Name Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Print At Home customizable name-badge for RMRRF 2025, complete with slot for a Maker Chip!
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
May 12, 2025 - Updated layer swap badge to not have holes. Thanks to mjonuschat for the catch/fix!
This is a modular name badge created by @kyle_gb, @alexandertmoss, and @hartk on the Voron Design Discord! It is designed to be modular, and allow you to customize it, as well as has a slot for a maker chip to be shown off.
There are two different versions of the Name Plate. The multicolor one is designed to be printed on multicolor capable printers (such as BoxTurtle!), while the Layer Swap version is intended to be printed with you manually swapping filament at certain layers to handle the color change.
The name plates are retained in the badge with short sections of 1.75mm filament.
-----
These are the recommended print settings:
Material: Doesn't matter
Layer height: 0.2mm
Extrusion width: 0.4mm
Infill percentage: Doesn't matter
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4
Solid top/bottom layers: 5
-----