ANGEL Figurine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ANGEL Figurine
- Ocena
- 4,9 / 5
- Polubienia
- 695
- Pobrania
- 4489
- Wydruki
- 21
- Wyświetlenia
- 10 729
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
ANGEL Figurine
Printed with fuzzy skin effect.
Fuzzy Skin: All Walls
Fuzzy Skin Point Distance: 0.3
Fuzzy Skin thickness: 0.1
If you're interested in the commercial use of my models, check the link to my Patreon https://patreon.com/29flo
All my photos are real and show an actual 3D-printed figure photographed by me.
As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.