Armrest supports - TT position on stationary
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print TPU arm rests. TT position for use on a stationary bike only.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This was designed for use with my bike on an indoor trainer. It should not be used on an outdoor bike. I have tried multiple TT bars and none have been comfortable for use with my trainer. I found my position was most comfortable when I rotated my drop bars upwards and rested my forearms on the corner bars. So, my new bike has a single tear shaped drop bar which can not be rotated.
The design is not the best looking thing I ever created but it does work. Designed for a single tear shaped drop bar. Very comfortable for 1 to 2 hours if I get into a TT position.
Can be printed without support (turn the three supports on their side). Simply mirror for the other side.
TPU - 0.3 draft mode. 50% infill but whatever you need. I used epoxy to glue the upper arm section once I had the supports on the drop bar. You can position however you wish to get best feel.
Update: I use zip ties to keep on tight. Still use these almost daily