Armrest supports - TT position on stationary
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print TPU arm rests. TT position for use on a stationary bike only.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This was designed for use with my bike on an indoor trainer. It should not be used on an outdoor bike. I have tried multiple TT bars and none have been comfortable for use with my trainer. I found my position was most comfortable when I rotated my drop bars upwards and rested my forearms on the corner bars. So, my new bike has a single tear shaped drop bar which can not be rotated.
The design is not the best looking thing I ever created but it does work. Designed for a single tear shaped drop bar. Very comfortable for 1 to 2 hours if I get into a TT position.
Can be printed without support (turn the three supports on their side). Simply mirror for the other side.
TPU - 0.3 draft mode. 50% infill but whatever you need. I used epoxy to glue the upper arm section once I had the supports on the drop bar. You can position however you wish to get best feel.
Update: I use zip ties to keep on tight. Still use these almost daily