Pwnagotchi Compact Case (Raspberry Pi Zero + UPS + RTC + e-Paper)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a compact and robust enclosure for your Pwnagotchi.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Case includes precise cutouts for USBs and SD card, as well as a mounting loop for attachment to bags or keyrings.
📦Hardware used in this build:
🧠 Raspberry Pi Zero WH
⏰ RTC Module: RTC Pi DS1307 - Real Time Clock Shield
🔋 Power Management HAT: Waveshare UPS HAT for Raspberry Pi Zero (19739)
🖥 Display: 2.13" Waveshare e-Paper Shield (250x122 px)
🛠 Assembly Notes:
✅ Maintain exact standoff heights between the layers as shown in the reference drawings (43.26 mm total height).
⚠ The coin cell battery holder on the RTC module protrudes above the PCB more than is appropriate. You will need to file the bottom of the holder down slightly to allow it to be above the display board.
🔩 The case is secured using four M2.2 screws (top access).
Cover holds on case with 4 3x2 neodimium magnets, see picture.