Voron 2.4r2 Elecrow 5inch screen mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ive built myself a Customised Voron 2.4 Ive been using Elecrow screens on all my printers and computers now for…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Ive built myself a Customised Voron 2.4
Ive been using Elecrow screens on all my printers and computers now for sometime since i give up on Waveshare ones having had 2 fail and piss poor after sales!!!! this is my screen https://www.amazon.co.uk/dp/B0D1FT83ZJ?ref=ppx_yo2ov_dt_b_fed_asin_title
also required are some M3 insets and 25mm or 30mm M3 bolts
Mine is CF ABS
atmosphere controlled chamber 258'c HE 100'c BED 70mm 40mm outer wall 3 hrs Bezel 6hrs Mount
Category: 3D Printer Parts
added a 2nd version, to allow for a Click Clack fridge door mod to be used,
but it does sit lower than the feet, so you need a counter over hang or extend your feet 30mm