Voron 2.4r2 Elecrow 5inch screen mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ive built myself a Customised Voron 2.4 Ive been using Elecrow screens on all my printers and computers now for…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 22
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Ive built myself a Customised Voron 2.4
Ive been using Elecrow screens on all my printers and computers now for sometime since i give up on Waveshare ones having had 2 fail and piss poor after sales!!!! this is my screen https://www.amazon.co.uk/dp/B0D1FT83ZJ?ref=ppx_yo2ov_dt_b_fed_asin_title
also required are some M3 insets and 25mm or 30mm M3 bolts
Mine is CF ABS
atmosphere controlled chamber 258'c HE 100'c BED 70mm 40mm outer wall 3 hrs Bezel 6hrs Mount
Category: 3D Printer Parts
added a 2nd version, to allow for a Click Clack fridge door mod to be used,
but it does sit lower than the feet, so you need a counter over hang or extend your feet 30mm