Mr Frog the nightstand for IKEA RANARP floorlamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clamp-on nightstand for IKEA Ranarp or 19mm rods; no disassembly needed. Requires 4x M4 40mm bolts and nuts + surface.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
his nightstand attachment was designed specifically for the IKEA Ranarp floor lamp, but it also works with any lamp that has a 19mm rod.
The original model was a single printed part. However, I couldn’t disassemble my lamp to attach the clamp, so I redesigned it as two separate pieces. That way, the lamp doesn’t need to be taken apart for installation.
To assemble it, you’ll need four M4 bolts (40mm) along with matching nuts.
Oh, and the tabletop—mine is a round black MDF surface with a 150mm radius. You could also 3D print one, as long as the screw holes match the clamp's position. Or even print the whole thing as one big piece, if that works better for your setup.
Believe it or not, I actually had this round wooden plate just lying around in my workshop. And got inspired by it to design this lamp night stand.