Deburring Edge jig Cutter with side burr discharge (for wood and plastics/rubber material)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dear Gentlemen,I took the great idea of Mr. Timo, thanks to share it, please have a look of his item…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Dear Gentlemen, I took the great idea of Mr. Timo, thanks to share it, please have a look of his item https://www.thingiverse.com/thing:4318301 and I made a new design based on my needs, the parts are not interchangeable with his project, my jig is bigger but I used his idea for the cutter blade segment. The JLAB project is different since I added a side burr channel instead a burr box and an ergonomic handle, in addition I used no.:4 M3x20 screws to assebly the parts with a no:4 M3 insert instead of M3 bolt. Available for 0.5, 0.75, 1 mm chamfers. The burr channel seems works well :)!
I printed it with resolution 0.08, 40% of infill, the bottom part need support. Thanks again!
Regard
Jonweb
Print Settings
Printer Brand:
Creality
Printer:
K1
Yes
Resolution:
0.08
40%
Filament: Aceaddity PLA Grey
Category: Hand Tools