Deburring Edge jig Cutter with side burr discharge (for wood and plastics/rubber material)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dear Gentlemen,I took the great idea of Mr. Timo, thanks to share it, please have a look of his item…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dear Gentlemen, I took the great idea of Mr. Timo, thanks to share it, please have a look of his item https://www.thingiverse.com/thing:4318301 and I made a new design based on my needs, the parts are not interchangeable with his project, my jig is bigger but I used his idea for the cutter blade segment. The JLAB project is different since I added a side burr channel instead a burr box and an ergonomic handle, in addition I used no.:4 M3x20 screws to assebly the parts with a no:4 M3 insert instead of M3 bolt. Available for 0.5, 0.75, 1 mm chamfers. The burr channel seems works well :)!
I printed it with resolution 0.08, 40% of infill, the bottom part need support. Thanks again!
Regard
Jonweb
Print Settings
Printer Brand:
Creality
Printer:
K1
Yes
Resolution:
0.08
40%
Filament: Aceaddity PLA Grey
Category: Hand Tools