Counting matching models…
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
A holder for deburring tool blades. The handle I had allowed the blade to rotate, which is great for deburring tools but inconvenient for deburring edges of parts, which is primarily what I use these tools for. This handle is designed…
My attempt at answering this question: https://www.reddit.com/r/Fusion360/comments/1lflvs7/how_to_make_these_spikes_evenly_spaced_around_the/
I wanted my caddy for a deburring tool to be stackable, and make it easy to grab the tool out of the bin. None of the existing holders fit the bill, so I made my own! This one is good enough for me, but on revision I would: Increase the…
Can you solve this puzzle? To print the puzzle you will need to print the same piece 6 times. Good luck!
Supporto per parete attrezzata HSW Honeycomb Storage Wall per Chamfer/Deburring Tool per la ricarica delle munizioni. lo strumento nella foto è di produzione RCBS. Il supporto si aggancia alla parete con l'aggiunta di un inserto standard…
Notes To use, insert a 0.125" shank deburring blade into the end of the handle until the groove in the blade lines up with the hole in the side of the handle. Press the clip into the hole until it snaps into place around the blade.…
Overview If you've used a Baratza conical burr grinder for a while, then you'll be familiar with the sacrificial ring burr holder (part number SP0101174 ) cracking and needing replacement. It only costs $5 + shipping or $20 from a local…
Added deburring tool slot, blade holder, and a small tray for little bits and bobs. Excellent model. .2 Layer height, hybrid tree support
Shortened handle to let it fit associated storage box. Also adjusted the diameter so the metal tool would go into handle. Did a double adjustment of the ring so it would more easily screw onto handle Print with PETG on side with 6-10 mm…
A carrying/storage case for deburring tool. printed in bright red to make it easy to find. Have to use razor knife to trim connecting pins and back side of pin opening slot. Use pliers to apple pressure evenly and slowly to get it to…
The JavaPresse is a budget friendly burr grinder for coffee noobs like myself, and as usual you get what you pay for. On its own the body is pretty slippery, so whatever hand isn't cranking the lever is going to get an incredible forearm…
Holder for the Ruko Unigrat deburring tool. Based on a holder that I found which fits the Ikea Skadis, now fits the Honeycomb Storage Wall. Print with supports for the holder. Unfortunately I had to make it this way since the Ruko…
Simple holder to store the NOGA deburring tool directly on the Elegoo Centauri Carbon using an existing case screw.
Dental Burr stand for 2.35mm shank burrs, mostly used by dental technicians. This burr stand consists of 7 different parts: 3 parts on each side (blue ones in pics) 1 part in the back (orange in pics) 1 main body part (yellow in pics) 2…
Este modelo incluye dos versiones diferentes de un burro antropomórfico expresivo , diseñado como un personaje completamente original , inspirado en los compañeros carismáticos de los cuentos y la fantasía clásica. Cada figura presenta…
I've read a few posts about aligning the ceramic burrs in the Hario Mini Mill Coffee Grinder to improve the consistency of the grind size (less fines and boulders) and figured a 3D printed version might be better than packing in paper and…
A quick remix, adding 10 mm to the handle length. Also centerd the tool holder to fit better.
Parkside deburring tool case. It can hold up to 11 blades, one of which is installed in the tool itself, and the lid is held in place by friction.
Simple storage box for a deburring tool and 9 inserts with magnets to hold covers together (4 mm r x 2.5 mm h magnets to hold the parts). For better results: - Variable layer height: Quality / Speed = 0.00, Smooth = 10
When deburring my models printed, I found it hard to set the startingpoint correct without holding the cutterblade. It was turning the wrong way all the time. To make it more fixed, I printed this with a TPU 95a. Now it is sort of fixed,…
Deutsche Version Die Geschichte hinter dem Projekt Der Teufelsknoten gehört zu den klassischen mechanischen Geduldsspielen, die auf den ersten Blick einfach wirken – genau darin liegt jedoch die Herausforderung. Dieses Puzzle wurde…
Gridfinity bin to hold 6 in Mitutoyo Calipers and Deburr tool. Contains storage for spare deburr blades and SR44 battery. Standard gridfinity geometry (42mm unit length and width, 7mm unit height) Printed with PLA. 15% Adaptive cubic…
Gridfinity bin holder for AFA Tooling Debarring Tool. For use with hexagonal handled deburring tool.
Gridfinity bin to hold the Maker Supply Deburring tool (professional trimming tool kit) . Maker's Supply Professional Trimming Tool Kit | Bambu Lab UK Store
Six-Piece Burr Puzzle - Medium Difficulty This 6-piece burr puzzle looks simple, but dont be fooled. It requires careful thinking and the correct sequence of moves to assemble. This puzzle consists of 6 similar pieces that slide together…
this model was inspired by a commercial I saw but nobody was printing it... probably because of micro plastics
Original instructions kept the same: Description Based on @Whity's design , I've designed an insert to hold steady and secure the tool itself and the spare holder as well. Options The .step file included multiple options to print.: You…
A deburring tool holder for the Honeycomb Storage System. The difference with other versions is that this doesn't need supports to print perfectly. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Category: Tool Holders…
Remix of the gridfinity deburring tool bin by Prints and Automation.
Wood carved texture with detailed totem design. Minimal supports. Great shelf or desk centerpiece. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld ( https://makerworld.com/makerlab/imageTo3d )
This model needs: A pencil sharpner, that can be disassembled. Instructions with the images. Alert! This tool kan be harmfull. Don't use it to harm other people or living creatures Any harm caused by this model is the responsibility of…
A simple small deburr tool that uses standard blades (3mm). This is printed with a magnet inside to hold the blade in place. During the print it should pause (at layer 332) so you can insert a magnet. The magnet size i use is 4x2mm
A simple protective case designed to store your grinder burrs. Currently available in 64mm and 80mm. The case screws on and off. The threads may feel tight at first but will loosen overtime with use—this is intentional, as a snug fit is…
This is a remix of Lndnny's deburring tool case, edited to fit a Libration extended handle deburring tool (150 mm x 17 mm) and any other compatible models. Please check the dimensions of your tool before printing! Highly recommended to…
Burr adapter to fit a Mazzer 233M burr to a Fiorenzato F64E to the top burr holder. The origional Fiorenzato burr size is 64mm, but the Mazzer burr is ~64,3mm and therefore it doesnt fit. This adapter fits in between the burr and the…
I cooked this Gridfinity holder up for my own workbench organization, even though I’m not great with Fusion 360! It holds my Fowler 6" AutoCal digital caliper and AFA Tooling BS1010 deburring tool neatly stored and ready to grab whenever…
A simple holder for 3.2mm deburring blades. The handle is one piece. The tip is split by a small slot, so the blade can be pushed in and will snap in place. The ring keeps the two halves together. Update dec 25: Added new model files for…
It is made for pegboards with 15 mm hole pitch. It should fit the pictured common deburring tool and one spare blade.
Update! 02-12-2023 These inserts now only fit the new versions of de module's drawers. The new drawers are 31mm instead of the orignal 28mm. New drawers still fit the original modules. This deburrer inserst for the module 40 drawers. they…
Pegboard hanger to hold a deburring tool. Fits standard 1" spaced pegboard
Because i bought a set of some different blades but just one handle, i made my own handles. Print Chip The 2 halfs are mirrored. Print both without support. Additional Parts A deburring tool blade (e.g. BS1010, BS1018, BS1012, BK3010, …)…
Mount for a generic deburring tool for IKEA Skådis pegboards. It holds the tool plus up to 12 replacement blads. It can be printed upside down without using any supports at all. I printed it with 0.2 mm layer height, 15% gyroid infill and…
There are some similar models to this, but I couldn't find one that could fit the holder and also the blades in horizontal position without wasting too much space (this one only requires a single additional square). The blades could be…
Deburrer holder This is my very first design im uploading and sharing with everyone! I made this for my Creality Sermoon D1 but im sure it can fit on other printers with same screws. The screw hole is made for a m4x10? I think im not sure…
Puzzle description: To open a standard 6 piece burr you perform only moves of a singele piece (or a group of pieces) which must be parallel to one of the three axis of the burr. Here you have one rotating stick which behaves differently:…
Remixed Deburringtool Holder on Multiboard from @Chris3DPrints for slimmer 12&14mm Deburrer I have attached the STL and STEP files incase you want to modify it.
Target shape like Bill Cutler's GigaBurr, but more pieces. 13 moves to remove first piece (GigaBurr has 8).
14 moves to remove first piece. Sometimes a bit wobbly, but cannot be disassembled by rotation.
Credit to @darious_461845 and @threatdisplay
I recommend 3 or more walls. Also, consider print with brims (especially with the taller models). There is a retention bump in the handle. You may need pliers to force the tool shaft past that point. When it's all the way in, the tool…
A 1x1 gridfinity block that holds the AFA deburr tool and stores spare blades. Slot provided for storing the tool blade-down. Tool: https://www.amazon.com/gp/product/B01L2XR4P2 (no affiliate) Editable scad file included; requires the…
Remix of this model , allowing for the tool to fit inside a 1x4 Gridfinity module. Since other modules can't be stacked on top of this one, I've used the same flat top design as these gridfinity modules , as well as matching the height so…
Who doesn't know it, you have exactly one deburrer with replacement blades, the blades are where they should be, but the deburrer itself is nowhere to be found. I recently discovered a nice pocket screwdriver while browsing here on…
Stand for deburring tool you can find on AliExpress with spare knives included for around 3-5$. This tool is great for removing sharp edges of your prints, especially after the brim has been removed. I hate those side mounted stands…
Burr stand for up to #70 2.34 shanked burrs. Hole diameter is 3.5mm, depth around 10mm. Printed in PETG.
A practical holder for the deburring tool from "Meistergriff". Most deburring tools from other manufacturers will likely fit as well, but they have not been tested. Enjoy!
LIFE IS NOT ALL BURRITOS & STRIPPERS MY FRIEND, sign Category: Signs & Logos
LIFE IS NOT ALL BURRITOS & STRIPPERS MY FRIEND, sign Category: Signs & Logos
Generic PETG used on my Bambu Lab A1 mini. Nozzle: 255C Bed Temp: 70C Tree supports manually drawn onto the lip of the overhang only. See 3mf file.
Cap for one of Amazons most sold deburring tools: the full metal version from Vastools. Protect yourself and other items from damage by the sharp knive of the deburring tool Very simple model, but with a very nice hold on the tool.
I look for efficient designs and, while here are many deburring tool holders already available, none met my criteria. I wanted blade storage, but towards the wall so I'd be less likely to accidently grab a blade while retrieving the tool.…
They aren't called burrowers for their swimming ability. These set of models features an individual popping out of a tunnel, another diving back in and an empty tunnel token. Each stands on a 30mm base, and is to scale with the other…
Settings I used: Printer: PRUSA MK4 Infill: 15% Layer height: 0.3mm Brim: Yes Supports: Yes Filament: PLA
Designed a mount to fit my Performax deburring tool that is compatible with the Honeycomb Storage Wall system. It attaches to a single plug with an M3x10 bolt and nut. May need to scale up or down to fit other brands. Link to the storage…
This is a very minimalistic holder for the Noga Teddy Burr deburring tool that can be purchased from prusa3d.com. I printed it with the Prusa Mini with PC blend carbon fiber.
I dropped the container for my Oxo conical burr grinder and needed a replacement. You can’t seem to get them from Oxo, so I modeled one. Works great.
This is a model for a generic Deburring Tool holder for the Honeycomb Storage Wall System. It also holds the spare blades.
Description This is a small, lightweight desing to keep your workspace more organiced and tidy. Its one of the Skådis addons I want to desing. Update: New version with the right dimenesions. Dont use v1!
Here is a simple holder for both items… the arms are designed to be flexivble so you can push the solder scroll trough the slot
Remix of: https://www.printables.com/model/501528-honeycomb-storage-wall-afa-deburring-tool-holder-l I wanted a simple holder for my AFA deburring tool. I made two versions: One with 1 insert and one with 2 inserts so you can choose how…
Just a little cleaning tool for Cuisinart burr grinders:…
I made this gridfinity holder for a performax Deburring tool I printed it in MH build white PLA (not sponsored) Check out the timelapse I made here Hope you enjoy it! Thanks, Design lab 3d
Remix of the tool created by NoobAmStewer. Modified the handle with hex shape to prevent the tool from rolling around. Created new blade holding blocks that fit much better. It prints correctly in my Elegoo Neptune 4 Plus. Note: The cap…
I have a deburring and chamfer tool from RIDGID SCANDINAVIA A/S (catalog number 34965R). I made a PETG holder that allows me to mount it and use it with a common drill. It is mounted on a M8 screw.
4 by 2 Gridfinity box for CNC Kitchen and AFA deburring tools. Also includes 14 holes for extra blades.
Had this puzzle at home when I was little. Didn't know how it was called, modeled from memory. It is three-piece burr puzzle first mentioned by Wyatt in his 1928 book.
PETG -No border -Skirt Loop : 0 Support style Organique 4 x wolfcraft 4313000 trapezoid blade 2 x M6 x 20 2 x M6x 40 -Support/Pattern Spacing : 3mm After print : It is best to use a cutter to remove the supports It is advisable to use a…
Remixed your nice model, to make the Tool Version of CGBoom fit in.
An updated version of Chris3DPrints' Deburring Tool Holder for Multiboard, where I changed the hole sizes to fit my deburring tool, then I added a pattern around the circumference of the body and added a fillet. I also made - uploaded - a…
Remixed lids for MTG Commander Deckbox to fit Bloomburrom and LOTR expansions. Compatible with Marc Lemming's and Karmah's deckbox models. Feel free to ask for variations, I'll probably add new ones in the future. THIS MODEL ONLY CONTAINS…
The Insert - Top was remixed because my 3D printer is not very precise and the clip hole is 3.4mm big, so I added a test print for you to test the clip. if it's too loose this model is not for you.
A gridfinity holder for a generic hexagonal deburring tool that's 4x1x4 units and stackable. The deburring tool slot can be up to 145mm long by 15mm wide. This variant fits better in my setup. The gridfinity template this was made with…
A 2x1 organizer tool bin compatible with the amazing (although unfinished...) Gridfinity Refined system by @grizzie17. Features: One slot for a standard X-Acto knife in a stable fashion, fully protecting the blade and not making the bin…
This is holder for Parkside deburring tool with blades and scalpel.
The gap0.1mm version worked for me, the other two are for more generous printers
This 3D model is a replica of the OXO Brew Conical Burr Lid. I designed it to match the original in both dimensions and fit. I also made sure to include the same curvature as the original lid, so it looks and feels just right when in…
