1 / 3
Cap for NB1100 deburring tool
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cap for NB1100 type deburring tools. Works with the standard BS1010 blades, but should fit all commonly available ones.
- Rating
- 5 / 5
- Likes
- 54
- Downloads
- 273
- Makes
- 10
- Views
- 965
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cap for NB1100 type deburring tools. Works with the standard BS1010 blades, but - thanks to the notch in the cap - it should fit all commonly available blade types. The cap is secured by two clip noses which grab the grooves at the upper end of the tool.
Print Settings
Rafts:
No
Supports:
No
Infill:
20%
Filament:
Generic PLA
Notes:
Print using 0.2 to 0.24 mm layer height and 0.42 mm line width. The cap has a pretty tight fit, so I recommend reducing the outer wall flow to ~95% for better dimensional accuracy.