Burris Scope Throw Lever (40mm)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.11 – €1.36 net (excluding VAT)
For file: 40mm Scope Ring Lever_0.15mm_PLA_MINI_1h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.24 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.31 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Rifle scope throw lever for a Burris droptine rimfire scope.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 153
- Makes
- 1
- Views
- 965
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
I recently purchased a Burris droptine rimfire scope and found that the magnification ring was extremely hard to turn. Decided to Design my own throw lever rather than pay $30 and get one that only hopefully works. Uses an M2 nut which is inserted with the printer paused and a 12mm M2 hex socket cap screw. Can only guarantee it will fit on the specific model listed but it may work on other scopes with 40mm magnification rings. Recommended to print with no supports, 100% density, and at least 3 walls. Make sure to add a pause so that you can add the M2 nut before the pocket closes.