Stonks AKA "Meme Man" Mask

Had a request to make a Halloween costume for a friend. Used the "Enslaved Plastic" model as a base, then used Meshmixer to hollow+thicken and repair any mesh-errors.

Tried printing at 249mm high. First print was at ~45 deg. angle and fell over after 5 hours. Second print was straight vertical with 5% infill support and .2mm X/Y/Z distance.

Support Settings:

Supports: Tree Infill: 5% Pattern: Grid X/Y Dist.: 0.2mm Z Dist: 0.2mm Tree Support Branch Distance: 0.8mm Tree Support Branch Diameter Angle: 7 deg Support Overhang Angle: 40 Tree Support Branch Diameter: 3mm Speed: 50mm/s

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:**

No

Supports:

**Resolution:**

.2

Infill:

**Filament:** Forgot PLA+ Bone WhitePost-Printing =============

Supports began to fuse with the base, which is understandable given my tight tolerances. I used a dremel and some sandpaper to remove the excess filament.

Category: Costume