Meshtastic Xiao ESP32S3 Wio-SX1262 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple case for the Xiao ESP32S3 with the Wio-SX1262 LoRa hat and a 0,96 inch OLED display.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 266
- Wydruki
- 1
- Wyświetlenia
- 3130
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Recently I found the Xiao ESP32S3 with Wio-SX1262 LoRa hat as a good and cheap Meshtastic node for installtion at home. For some time it was just sitting in a breadboard which, the USB cable dangling between some flowsers… you know, it had a quite bad WAF (wife acceptance factor).
So I made a case (surprise…) !
You will need:
- 4 M3*8 screws
- 4 M3*5*4 knurled nuts
- An IPX/UFL to SMA connector
- A 0,96 inch OLED dislplay
- The simple WiFi / Bluetooth antenna which comes with the ESP32S3 / Wio-SX1262 set
- A small piece of tape (it will help to keep the button in place while attaching the lid)
- 4 wires and a soldering iron for connecting the display
Connect the display as you can see on the photos (display ←→ ESP32):
- GND: GND
- VCC: 3V3
- SCL: D5/SCL
- SDA: D4/SDA
I made the case they way I needed it to be, I don't even know if anyone else would need it. If yes, I am thinking about a version without the display or without the knurled nuts, but for me it met my needs for now.