1 / 2
7/8-14 NPT to 3/8" ID hose adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for 7/8"-14 threaded female to 3/8" inside diameter flexible hose.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 221
- Wydruki
- 0
- Wyświetlenia
- 883
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (25)Powiązane
I made this as a test piece as I needed to see if I could get the tolerances to work on a boston valve for an inflatable boat. One on end is a 7/8"-14 male thread, on the other there is a barbed fitting. The barbs on mine hold so well I needed to cut the hose off to take it apart.
I can't comment on the amount of pressure this can take, use at your own risk.
Printing:
I printed it as it sits in the file with the smaller end as first layer, with supports on the build plate. Prints perfectly.