Rear Dash Camera Mount for 2025 Nissan Pathfinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another Remix for the 2025 Nissan Pathfinder
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 504
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Remix of iamSteven's Rear Camera Mount from another site.
I really liked the design of this, and was using it in my car for a few months without issue. While it was designed for his Land Rover, this works in many different cars, including the 2025 Nissan Pathfinder. It simply hangs on the inside lip of the headliner.
This version is cut from the original model and fits much better when the tailgate closes and doesn't hit the camera.
When the hatch closes it pushes the mount down slightly and it stays up against the plastic with no sound issues or falling.
This is printed in Inland PLA at 15% infill.
Please be mindful that standard PLA may not be the best material for this print if you live in a climate that can have significantly hot temperatures.
I have another camera mount for another car and it was printed in PLAF and it lasted through out the Northeast seasons. YMMV
Please leave a comment/make if you find this helpful. And thanks to iamSteven for the original!