3DO Nozzle Camera for Sovol SV08 - KB3D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Integrate the 3DO Nozzle Camera V2 into your SV08 with this non-invasive solution!
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 908
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
3DO Nozzle Camera Integration for Sovol SV08 3D Printers
Full assembly and install guide located in the files section!
Need to make some tweaks? STEP assembly file available!
Designed to integrate the 3DO Nozzle Camera (V2) into the Sovol SV08 without modification to the machine.
What you'll need:
Hard Parts:
3DO Nozzle Camera Kit - Build yours now here!
- Adjustable Focus Nozzle Sensor
- DSP PCB
- 100mm FPC Cable (With LEDs)
- 2.5M USB Cable
(2) M2x6mm FHHS
(1) M3x14mm SHCS
(15) Small Zip Ties
Tools:
1.27mm, 2mm and 2.5mm Hex Keys / Wrenches - Available here
Printed Parts:
1 of each of supplied STL files
We recommend printing in ABS, but PETG is also acceptable for most use-cases. These parts live relatively close to both the nozzle and the heated bed - but also require some compliance during assembly due to the snap-fit clasp.
Recommended Print Settings:
These parts are small! Be sure your first layer is set properly for success!
First layer height: 0.2mm
Other layer height: 0.1mm
Walls/Perimeters: 3
Bottom/Top Layers: 2
Infill: 20%