Headboard attachment for CPAP wall holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Uses the wall holder (being remixed) attaching it to the top of your Ikea bed frame top without drilling holes.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
It does not change the wall holder itself, but it is specifically overengineered to hold a screw for the nice wall holder being remixed so you don't have to screw neither your bed frame or a wall. Has additional holes for possible future upgrades. Attaches to a 40mm wide headboard (an IKEA frame). There is a screw to tighten it or use on smaller width headboards, but if you do - perhaps better to adjust the distance between sides in model itself.
Print in provided orientation (face with lots of holes down) does not need any supports.