Standing Desk Cable Chain 2.5in / 60mm Grommet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The start of a cable chain that slides into a 2.5in desk hole
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of “Standing Desk Cable Chain”, and specifically it's a grommet for the hole in your Flexispot or other desk that's 2.5 inches. The outer diameter of the grommet itself is 60mm, or 72mm with the lip. It's not as pretty as the original but it does fit in my desk with some wiggle room!!
You'll also need the cable chains themselves, available from the source model.
I printed this top down on my printer (as shown in the picture), with supports just on the round joint part. In retrospect the horizontal piece could have used supports too, but it's plenty structurally sound.