Pack de 5 magnets dinosaures - Pack of 5 magnets dinosaurs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Imprimés avec MMU - Printed with MMU
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Pour modifier la taille de l'aimant supprimez le et rajoutez un nouveau volume négatif cylindre.
La taille des miens est 18 mm de diamètre pour 5mm de haut. Il faut paramétrer le cylindre à 18,6 mm en longueur largeur et 5,1 mm en hauteur.
Placez le librement en X Y. pour le placement en Z collez le au plateau puis rajoutez 0,4mm.
Ensuite ajoutez une pause pour placer l'aimant avant la fermeture du trou
------------------------------------------------------------------------------------------------------------
To change the size of the magnet, remove it and add a new negative volume cylinder.
Mine are 18mm in diameter and 5mm high. You'll need to set the cylinder to 18.6 mm in length, width and 5.1 mm in height.
Place it freely in X Y. To place it in Z, glue it to the plate and add 0.4mm.
Then add a pause to position the magnet before closing the hole.