Rubbermaid TUSH Drybox Filament Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drybox system made for 21 cup Rubbermaid drybox
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I designed a base that specifically is made to fit in the 21 cup rubbermaid drybox. This also is using the TUSH system by filamentry and the PTFE guide by mp42 (both models linked below). I also added holes to use M3x30mm screws and M3 nuts to add space for silica gel at the bottom. You need 4, 608-2RS bearings per box as they are used in the TUSH. I glued the assembled TUSH rollers onto my base, but it works perfectly just sitting on top.
MODELS USED:
TUSH - The Ultimate Spool Holder by filamentry
PTFE Tube Guide by mp42
HARDWARE / SUPPLIES (amazon):
608-2RS Bearings
M3 x 30mm Screws
M3 Nuts
PTFE Filament Tube
CA Glue