Printdry vacuum holder for Gridfiity (with embedded magnets)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a PrintDry vacuum holder for the GridFinity storage system
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a PrintDry vacuum holder for the GridFinity storage system. It fits in a 1x2 GridFinity unit but the footprint of the receptacle is deeper than one unit. This was meant to be used with single row base plates such as this one.
It uses embedded 6x2mm magnets to attach to base plate
This is the base plate i use it with :
https://www.printables.com/model/1265400-gridfinity-wall-mount-base-plate
Required hardware:
- 8x 6x2mm magnet
Instructions:
To install the magnet, you must add a pause instruction at layer 13. When the printer pauses, install the magnets and resume printing.
IMPORTANT: Make sure that the magnets are all put in the same orientation as the ones in the base plate so that the magnets attract each others.