Pi Wall Mount Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted case for Raspberry Pi and RS485 dongle
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A small wall mounted case for a Raspberry Pi and a WasveShare RS485 dongle.
This case has mounts for a Pi 3, and a clip in area for a WaverShare RS485 dongle. The square port on the side can be used to pass an Ethernet cable in to the Pi, or if you're willing to make a small cable you can mount a CAT5/CAT6 keystone in the hole. There is also vent and mounting points for a 40mm fan for extra cooling.
This case was designed to be used with Solar Assistant on a Eco-Worthy inverter.
The Pi mounted using M2.5x4 screws, the cover uses M3x6 bolts, and the fan uses M3x12 bolts.
Dongle:
https://www.amazon.com/dp/B081NBCJRS?
Fan:
https://www.amazon.com/GeeekPi-Raspberry-Controllable-Adjustment-40x40x10mm/dp/B092YXQMX5