Pi Wall Mount Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mounted case for Raspberry Pi and RS485 dongle
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
A small wall mounted case for a Raspberry Pi and a WasveShare RS485 dongle.
This case has mounts for a Pi 3, and a clip in area for a WaverShare RS485 dongle. The square port on the side can be used to pass an Ethernet cable in to the Pi, or if you're willing to make a small cable you can mount a CAT5/CAT6 keystone in the hole. There is also vent and mounting points for a 40mm fan for extra cooling.
This case was designed to be used with Solar Assistant on a Eco-Worthy inverter.
The Pi mounted using M2.5x4 screws, the cover uses M3x6 bolts, and the fan uses M3x12 bolts.
Dongle:
https://www.amazon.com/dp/B081NBCJRS?
Fan:
https://www.amazon.com/GeeekPi-Raspberry-Controllable-Adjustment-40x40x10mm/dp/B092YXQMX5