Cultivator Wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Replacement Wheel for Electric Cultivator
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
Parametric Replacement Wheel for Electric Cultivator
A custom-designed replacement wheel for electric cultivators with the following specifications:
- Outer diameter: 145mm
- Inner shaft diameter: 12mm
- Tire width: 30mm
- Bolt placement: 23mm from innermost point
Designed for easy printing with minimal support requirements, making it accessible for most 3D printer setups. This fully parametric design can be easily modified using the included Fusion 360 (f3d) file to fit similar cultivator models or adjust dimensions as needed. Perfect for replacing worn or damaged wheels on your garden equipment.
My cultivator uses an M4 bolt and washer to fasten the wheel to the shaft.