1 / 2
Rovie, the little desktop rocker-bogie Rover. — zdjęcie 1
1 / 2

Rovie, the little desktop rocker-bogie Rover.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small toy/model with a functional rocker-bogie mechanism with a simplified differential.

Ocena
0 / 5
Polubienia
8
Pobrania
53
Wydruki
0
Wyświetlenia
309
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

I made a small model of a rocker-bogie mechanism rover to test few ideas. I eventually intend to scale it to a functional garden-size motorized version, but for now just wanted to make a toy that demonstrates the movement principle.

Project was made in FreeCAD 1.0. I include the source FCStd file that can be used to alter the parameters and customize anything you'd like. Design is based mostly on a master sketch + some spreadsheet calculations for the axle sizes.

Mechanism works, axles can be lubricated. I printed everything in PLA, without supports, using 0.4 nozzle and a 0.2 layer height. Made axles with 8 walls so they don't have any infill (printed horizontally). Rest of the parts can use 2-3 walls and 10-20% infill.

DISCLAIMER: Real rovers work by applying power to the wheels (obviously) - not by pushing the main chassis. So be warned that it won't drive over obstacles when simply pushed forward into them. ;) When pushed on a soft surface like bed the wheels turn just fine.

Originally wheel had a 20mm diameter, 30mm seems to work better though.

Changelog:

  • 1.8v first time published. Second iteration of the wheel, chassis, rocker and bogie and third iteration of the axle.

Tagi