Rovie, the little desktop rocker-bogie Rover.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small toy/model with a functional rocker-bogie mechanism with a simplified differential.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 53
- Makes
- 0
- Views
- 309
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
I made a small model of a rocker-bogie mechanism rover to test few ideas. I eventually intend to scale it to a functional garden-size motorized version, but for now just wanted to make a toy that demonstrates the movement principle.
Project was made in FreeCAD 1.0. I include the source FCStd file that can be used to alter the parameters and customize anything you'd like. Design is based mostly on a master sketch + some spreadsheet calculations for the axle sizes.
Mechanism works, axles can be lubricated. I printed everything in PLA, without supports, using 0.4 nozzle and a 0.2 layer height. Made axles with 8 walls so they don't have any infill (printed horizontally). Rest of the parts can use 2-3 walls and 10-20% infill.
DISCLAIMER: Real rovers work by applying power to the wheels (obviously) - not by pushing the main chassis. So be warned that it won't drive over obstacles when simply pushed forward into them. ;) When pushed on a soft surface like bed the wheels turn just fine.
Originally wheel had a 20mm diameter, 30mm seems to work better though.
Changelog:
- 1.8v first time published. Second iteration of the wheel, chassis, rocker and bogie and third iteration of the axle.