Gibbous Outfitters Style MP5 Front Sight Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clamp on mount for a Surefire M600 style flashlight for the MP5s front sight.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 328
- Wydruki
- 1
- Wyświetlenia
- 1311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Notes
I only have a WE MP5, so my dimentions may be slightly off for other brands but this should work on pretty much any MP5 including MP5SDs.
I have had one make now confirming fitment on a MKE AP5 (Turkish MP5 clone).
Hardware
If you are using an AliExpress Surefire clone:
2x M4x25mm button head screws (When taking the images I only had flanged head bolts)
If you're using a real Surefire I'm fairly sure they use some weird imperial screw so good luck.
Versions
There are a couple of different versions available.
The real ones come with a titanium plate. I have added provisions for a 0.8x29x9mm steel plate with some holes in as stand in, but honestly it's probably overkill. (These files should be in the ‘With Plate’ folder.)
The normal files are in the ‘Standard’ folder.
In both folders there is a pressure switch version and a no-switch version, the pressure switch version looks like this:

And the no-switch is like this:

The shim is the same either way.
Printing
To be honest, printing the switch version isn't great, as the shapes leave no real flat face to print from, I have found that having it up at an angle like this:

Does work, and didn't cause me any issues, but YMMV.
Printing the no-switch version is much easier, just print it in the orientation the slicer tells you to, same with the shim:

Printing in Nylon
I had the ‘Standard’ version MJF printed by JLC in PA12-HP. For one set (the switch, no switch and the shim) it came to ~$10 posted so that was supprising cheap.
Most of the parts had a load of warnings about thin walls but they all printed perfectly. Also - another warning about JLC is that they don't like anything gun related I put down the item as a plastic bracket and again didn't have any issues.
