hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for style and strength, it's perfect for hanging coats, bags, towels, or keys, helmet etc.
- Ocena
- 5 / 5
- Polubienia
- 323
- Pobrania
- 886
- Wydruki
- 5
- Wyświetlenia
- 2660
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🛠 Cura slicer
Settings for Strong PETG Prints
Printer & Material Basics
Nozzle Temp: 240–250 °C (start at 245 °C and adjust if needed)
Bed Temp: 75–85 °C
Cooling Fan: Off or max 20% (layer fan can weaken layer adhesion)
Enclosure: Recommended for consistent temps (not mandatory for PETG, but helps)
Layer & Wall Settings
Layer Height: 0.2 mm (or 0.28 mm for stronger/thicker layers)
Wall Line Count: 3
Wall Thickness: At least 2 – 3 mm
Top/Bottom Layers: 5–6
Top/Bottom Thickness: 1.6–2.5 mm
Infill
Infill Density: 90 - 100%
Print Speed
Print Speed: 30–45 mm/s (slower = stronger)
Wall Speed: 25–30 mm/s
Initial Layer Speed: 15–20 mm/s
Other Key Settings
Initial Layer Height: 0.24 mm (good bed adhesion)
Z Hop When Retracted: On
Retraction Speed: 25–35 mm/s
Generate support : Enable
Support structure : Tree
🔧 Pro Tips:
Dry your filament – PETG absorbs moisture and it greatly reduces strength.
Use a brim or raft if warping is an issue.
For critical strength parts: consider increasing wall count and infill rather than relying on 100% infill alone.
Turn off "Print Cooling" or keep it minimal for layer bonding.