1 / 3
Radiator Valve Cap for 7 x 3 spindel (and STEP files)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radiator Valve Cap 7mm x 3mm spindel
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 265
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (14)Powiązane
This is a replacement Radiator Valve cap that you would get on an isolation valve.
I've added some ergonomic grip.
Will fit a valve a spindle dimension of 7mm x 3mm
PRINT SETTINGS
Something that will resist heat, mine are ABS+ from Eryone.
Print Upside down so no supports needed.
25% Gyroid fill
4 walls for strength
5 top layers for strength
I've added a version that has text for rotation for Opening the valve. Not sure if they're all the same direction, my valves are old.
Additionally there's STEP files to edit if you wish.
Such an exciting print.