Kitchen scale holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a set of 2 brackets that I am using to store my kitchen scale underneath my cabinet using command strips.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 338
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I highly suggest printing these standing up (shown in screenshot of slicer) with the triangle shaped support structure against the bed. This should give enough bed adhesion as well as orienting the layer lines for maximum strength.
I also suggest using at least 4 walls/perimeters. This will ensure that the whole bracket (minus the triangle support structure) is solid walls. This causes longer print times, but makes this bracket super strong.
I did print this in PLA but I suggest using PETG as the PLA is already starting to warp from the small amount of weight from my scale.