REDMAGIC Shadow Blade 2 octagon joystick cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a new cover for the joystick that has 8 notches similar to n64esk controllers, instead of the original round circle.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
the Redmagic Shadow Blade 2 is a sweet gamepad for emulators on the phone, but i was looking around for a whole new faceplate with 8 notches at the joystick instead of the round circle. didn't really look that far because i noticed the covers that go around the joysticks on the faceplate was detachable and figured i could make one myself, so i took them off, messured them and made this new cover with 8 notches that line up 98% so its easier to emulate n64 or similar controller movements
Printed it with standard PLA black and rapid PLA+ Red on a Neptune 4 Pro.
0.2mm,
walls 2+,
classic wall generation in OrcaSlicer,
print orientation - as the model comes.
less then 5min and under 1gram for both sides to print, no support or brim needed if the bed is clean ofc, atleast on my printer.