Hose Hanger for Compressed Air Hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple hanger to wall mount flexible compressed air hose.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 157
- Wydruki
- 2
- Wyświetlenia
- 594
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I needed to run some flexible compressed air hose around the wall of my shop, so I made these wall-mounted hangers. They are good for hose up to 17mm diameter (and maybe a bit bigger). These are not designed to take a lot of stress or pulling force (but are pretty strong anyway); they are just for hanging the hose up and out of the way.
These are “semi-permanent” hangers in the sense that the hose can be easily removed from the mounted hanger if I want to re-position or replace it, without having to remove the hanger itself.
The hangers are designed with an angled screw mounting hole to make it easier to insert the screw in overhead locations. The mounting hole diameter is 4.8mm (3/16").
Print Instructions
Print in PLA using the 3mf or gcode files provided. In general :
- 0% infill
- 5 perimeters
- print edge down on bed
I printed on a smooth build plate, and did not need to use a brim.
CAD
The OnShape 3D CAD files for this are here :