Print-on bed mount for EBB42
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-on bed mount for measuring resonance on y-axis
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- GNU General Public License v3.0
I wanted to tune my Sovol SV06 Plus. My KUSBA didn't work anymore and I had a whole bunch of extra EBB42s. EBB42s have an ADXL345.
I flashed one for USB and designed this mount. I used it to measure the resonance on the y-axis of my printer.
You can use M3 machine screws, but I think you'll have better results with screws with a coarser pitch. Make sure the screws are 8mm or shorter.
The STEP file is attached so you can remix to use different size screws or whatever. I recommend that you print with a brim for best adhesion. This is a one time use part, so don't waste your carbon fiber nylon.