GamerSupps Cup/Tub Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So you like Gamersupps which means you could have multiple Waifu cups or tubs and no where to display them. Solution!
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
What you are looking at is a solver to a problem a few of us have.
Having too many Waifu cups or GamerSupps tubs and nowhere to display them, introducing my Gamersupps Shelf.
Designed to hold one Cup or Tub of your choosing, Pictures that are shown mounted to the wall is the V2 which was gonna be posted till I found a design flaw, that flaw has been alleviated by putting a screw hole on the top side of the print, this solves the drooping issue.
I personally printed it with PETG with standard print settings, Ironing was on for a smooth feel but not needed if you don't want to. Printed vertically For no supports needed.
A Engineering document is show as well for measurement and scaling before printing, better to have the measurement then to print and regret. Screws used were #8, 1 inch
DO NOT RECOMMEND USING FOR AN ACTIVELY USED CUP HOLDER, this has been tested for long term use of putting something in and out causing wear and tear
Please enjoy this make of mine and show off your cups or tubs in the makes section
Based off the design of BushDid9711 on thingiverse https://www.thingiverse.com/thing:6222761