CPAP hose magnet connectors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connects ResMed CPAP hose ends with each other using magnets.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
In continuation of my attempt to find a good use of “decommissioned” CPAP hoses I designed this magnetic connectors. They use 6mm wide and 2mm deep magnets. I suggest alternate polarity so in future you'll be able to connect any part with any part.
So far I have two variants for side B and one for side A. I might be adding other compatible elements in the future.
In case you just need a simple connector without magnets I crafted this model earlier: https://www.printables.com/model/1264591-cpap-hose-connector
I planned to use it for fume extractor while soldering. Unfortunately tests show it is too small and does not have sufficient suction for this purpose. I still plan to try it for small dust extraction. If you have more ideas on how / when or in which application it can be used please let me know in the comments below.