1 / 3
Flat ~10mm(!), ~25cm or ~46cm long vacuum nozzle for 35mm hose — zdjęcie 1
1 / 3

Flat ~10mm(!), ~25cm or ~46cm long vacuum nozzle for 35mm hose

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flat / narrow, short / long variants, vacuum nozzle for 35mm hose.

Ocena
5 / 5
Polubienia
12
Pobrania
112
Wydruki
2
Wyświetlenia
443
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Flat and long vacuum nozzle.

Dimensions:

  • 35mm hose (doesn't need to be perfectly 35mm)
  • 10.5x35mm nozzle, so flat
  • short: one part only: ~25cm
  • long: two parts connected: ~46cm

 

Print options:

  • printed from PETG
  • seam position: random (I like it that way but you may not, so please reslice in such case)
  • infill: gyroid
  • wall generator: Arachne
  • brim: 15mm outside. Print both parts standing up on flat end.
  • joint part (only) with a modifier that has fuzzy skin applied: all walls, point distance: 0.1mm, thickness: 0.1mm. Makes much tighter connection (but harder to split)
  • my (bambustudio) 3mf print profile is available
  • in filament settings → cooling → disable “slow printing down for better layer cooling” to get much faster print speed while keeping good quality

Debur edges after brim. Optionally glue parts (not needed IMO).

 

CAD files: fusion and step available.

Tagi