Mantle Clock - 2A - Hole for Clock Can be modified in Slcer to accomodate 2-1/2 to 3-1/2 clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned the Clock to be easier to print (On any 225 up Print Plate ), and assemble.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — NoDerivatives
This is A redesign of my Original that I had made in wood.
I made it Easier to print on most 225 + print beds.
If printed from the existing 3MF files no supports are needed and can be printed on the plate.
The Alignment pins are not required and ¼ inch dowel can be used to aid in assembly.
The Clock I used, was ordered from Amazon (Hicarer 80x18mm, thatrequires 76mm mounting hole. $9.99).
You can make a really nice Gift for less than $15 and your time.
The Raw “Mantle Clock 2A - 250417” Design is available on TinkerCad “Public”.
Feel free to Easily enlarge and or Modify.
Enjoy Happy Printing
& God Bless