Liczymy pasujące modele…
Mid-century mantle table clock This is a stylish clock for a desk/mantle/table. The design is purely based on a mantle/desk mid-century clock from Germany. For the clock, you will need a clock movement mechanism with a thread length of 9…
Mantle Beast mask. The model fits a 300x300x400 mm print bed at default scale. I recommend printing it with supports. There are two versions of the visor part: cut and plain. The plain version is there if you wish to either vaccum-form…
Mid-century mantle table clock This is a stylish clock for a desk/mantle/table. The design is purely based on a mantle/desk mid-century clock from Germany. For the clock, you will need a clock movement mechanism with a thread length of 9…
Dust cap for Aladdin lamps to keep debris from falling down the chimney and damaging the mantle.
A 3d figurine of the Shadow Mantle holder from Deltarune. Inspired by the Deltarune figures at Fangamer. please share your makes!
Christmas Stocking Hanger for Mantle or Shelf. Balanced to stay put on the edge without sliding off. 2 versions. one with 90 degree edges and the second with rounded edges. Print on its side. For filament with poorer adhesion I recommend…
40mm gap, but model files are included if you need something different. It's public domain, so use as you please.
An LED lit Christmas decoration for the table or mantle based on a Christmas tree light. It has a hollow base for a battery or cord powered LED. To assemble secure the bulb on top of the base with adhesive (super glue) and place hollow…
Mantle Beast mask. The model fits a 300x300x400 mm print bed at default scale. I recommend printing it with supports. There are two versions of the visor part: cut and plain. The plain version is there if you wish to either vaccum-form…
This is a remix to fit four knomi's and using the usb cable to power them. It's split in half to fit smaller beds. Also, resized to fit the knomi v2.
DISCLAIMER: TV is not secured to the wall. We are not responsible for any damage or injury if your TV falls. This includes 2 files that you will use to create 3 mounting brackets designed to hold your Hisense Canvas TV in place without…
This is A redesign of my Original that I had made in wood. I made it Easier to print on most 225 + print beds. If printed from the existing 3MF files no supports are needed and can be printed on the plate. The Alignment pins are not…
I designed a handful of super cool distorted cube artworks. Designed to sit on your mantle, these cubes add a modern look to your house. Printed in iron or copper filled filament, these will oxidize into a beautiful ornament!
Can be printed without any supports. The wire stripper fits into the holder either pointing inwards or outwards (pictured: pointing inwards towards the wall, with the blue facing out). Additionally, you will need one of the M2.5 Skadis…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
This bedsidestocking hook has been designed from the ground up with 3D printing in mind. A single piece stocking hook. Print on its side for best strength. Printing and Assembly The hook shown in photos was printed at 0.2mm layer heights…
We wanted a removable way to decorate our fireplace mantle for Christmas. This hook prints fast and has worked great for securing garland, lights, stockings, and decorations. Flat brown filament made them disappear in the garland.
Designed to replace the cover of a normal pop socket. Remix of JustinSpanier's blank pop socket cover. Category: Mobile Phone
Your stocking should hang parallel to the mantle, assuming your stocking loop is looping in that direction. If you are worried the print will snap at the hook, print where the front of the hook is on the plate. Otherwise, print it on its…
3D printable topographic miniature of Fremantle - 🇦🇺 Australia Capture the beauty of Fremantle 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates -32.057, 115.752…
This hanger is super basic and was for a need with a 5 inch deep mantle that had a small gap in the back for ledge work. We used this for stockings during the holidays. Used basic PLA
Dust cap for Aladdin lamps to keep debris from falling down the chimney and damaging the mantle.
A unique 3D printable creation — this Mantle Stocking Holder Hook, Weighted Base, Holds Christmas Stocking, No Mantle Damage Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File…
A 3d figurine of the Shadow Mantle holder from Deltarune. Inspired by the Deltarune figures at Fangamer. please share your makes!
Pop style AFL player Multicolour print Five colours Recommend 0.16 layer height and 0.22 support width with 1mm xy distance Best to increase purge to 2x to prevent colour leaking
Not terribly decorative, but it does the trick of holding a stocking over the mantle without damaging the wood. It's not critical that it "pinches" the wood, it really works just by making sure the loop of the stocking is held underneath…
This is a Gas Mantle Saver. It protects the fragile gas mantle while the inner casing is removed from the lamp. It's perfect to use while the kerosene lamp is electrified, so you dont need a new mantle when reverting it back to kerosene.
Keep your wits about you, a Darkmantle might swoop down from the cave ceiling! This is a 3D-printable 28mm scale miniature intended for use with tabletop roleplay games such as D&D. Four versions have been included: The model by itself,…
Quick hanger to put stockings up on your mantle. I've included the f3d file so you can modify it to fit your particular mantle. Print Instructions: PLA+ works well. Other plastics may too. 0.2mm layer height 2 perimeters 20% infill, grid…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Simple Friction hook that holds onto the mortar between bricks on my mantle for a secure place to hang the family Christmas stockings. The geometry has a very small surface contact with the bed so a raft might be helpful. I was able to…
My new YouTube Channel: https://www.youtube.com/channel/UCnnw56J\_TeOsF4M\_F5pPPJQ Oh Yeah! This was designed and printed for my friend's birthday party as a trophy for a video game competition he is hosting. Print and enjoy! Print…
I printed a set of stocking holders for my fireplace mantle. One has a front facing hook the other has kind of a side hook thing. Some stockings require one kind, some the other. This way they will all face forward properly. Print…
Create your own customizable necklace that easily comes apart. Mount it on a provided holder to keep the parts together! HAVE FUN!!!
I have included a version with the Voron logo and a blank version. I printed this using 4 walls and .4 layer widths with 40% infill. No supports needed. The modules are a fairly tight fit to hold them securely. I ended up using a folded…
I am using the pattern for the mail on https://www.ironskin.com/mail-collar-and-bishops-mantle/ . There are 2 versions, the compact version is specially stacked to fit multiple parts on one build plate. on a 300x300 volume I can fit the…
I’ve been wanting one of these extremely rare German made mid-century mantle clocks but they are really difficult to find and when you do find them they go for $1,000 - $2,500. So I decided to try and 3D print a replica. While not…
Merry Christmas display sign for your table or mantle.
I wanted a non-adhesive, non destructive way to hang stocking from my mantle. Threw together this design to achieve that. I added a thin strip of leather I had laying around to the underside of the top arm; this helps for a snug fit and…
I wanted a temporary way to hang my Christmas stockings from my fireplace mantle and designed this! My mantle stretches out quite far and so this hook wraps around and ensures the weight of the stocking & its contents is not going to…
I loved the design of @MarkRichardso_449235 's model of the Mid century Welby mantle clock, but having to trim and glue the lines and dots on the face into place was tedious. So I remixed it for printing on both printers with multi…
I, like @Steve_165797, loved @MarkRichardso_449235 's mantle clock, but really wanted to experiment with real wood grain displacement maps on it. I am pretty happy with how they turned out and decided I would post the results for anyone…
Updated with V2 for Bambu Studio for a simplified clock face body. Added a generic 3MF that is compatible with PrusaSlicer and others at the request of @tfhh
The STEP file contains three sperate objects which are separated by a small (0.2mm) gap. When printed separately they nest together for me with just enough friction to not slide out. I printed the inner and outer in a forest-green PLA and…
PrusaSlicer comes with model cutting capabilities, but I never felt the need to use them until I saw Mark's beautiful design and was overcome with build volume envy! I just had to attempt it on my Mini+. I started with Steve's excellent…
This is a design I Originaly made with wood and Corean that turned out very well, so I decide to designing a 3D Printed one. It is very simple to print. Takes about 8to 10 Hrs. It can be printed on a 250mm bed at 45 degrees. The size of…
Repurpose a dead or otherwise non useful iPod shuffle 4th generation to make a nice techy decoration. Either fully 3d print and glue on your printout with the image or use a 3d printed frame and laser cut window and back cover Directions…
For the holidays this year, we wanted to hang some decorations from the mantle. I had a couple of lengths of dowel in the garage that were already painted red for another project I never finished. A half hour later, I had this design done…
